Health risk assessment and prevalence of work-related musculoskeletal disorders among the aged brick molders, in India.

The Brickfield Industry is the major and oldest informal industry in India, where millions of brickfield workers make their livelihood. Aged brickfield workers are also involved in different activities in the brickfield, especially in brick mold activities owing to poor socioeconomic conditions. A cross-sectional study was designed to determine the prevalence of work-related musculoskeletal disorders among the aged brick molders and compare them with aged control subjects. A Nordic Questionnaire was applied to assess the discomfort felt among both groups of workers and the Rapid Upper Limb Assessment (RULA) method was used to evaluate posture during their job. The RULA posture analysis showed that the posture adopted by aged brick molders required changes immediately. The result of the ART tool also stated that the brick molding activities' exposure level was high and required further investigation urgently. The study concluded that due to working in a forward bending posture for a prolonged period, aged brickmolders suffered from severe low back and knee pain along with upper-limb disorders due to repetitive activities.

As Ceaseless as the Sea: How Modern Construction Machines Disrupted Canadian Senses and Sensibilities, 1870s-1940s.

Since the late nineteenth century, Canada has required modern construction machines for industrial growth. Thanks to their novelty and visibility, these machines entered the Canadian psyche, symbolizing hopes and fears about the relentless transformations of modernity. Metaphors depicting these machines as zoomorphic and monstruous reflected the environmental-technological infrastructures they built, which redefined nature through technologies like trains, ships, and automobiles. This article discusses how Anglo-Canadians, particularly Ontarians, interpreted technology, drawing parallels with the automobile's history. Both had a problematic coexistence with humans as equally empowering and oppressive mobile machines that were imposed on public spaces and constructed as necessary for progress. The builders used the machines' allure to present construction as an inclusive civic spectacle and foster public tolerance for their relentless disruptions. They accomplished this faster than the automobile industry came to dominate the streets, as evidenced by the celebration of "sidewalk superintendents," compared to the contentious reproach of "jaywalkers."

Feasibility analysis of the market-oriented construction management model of drainage project based on evolutionary game.

The construction and operational costs of drainage projects are high. Traditional construction management models impose significant financial pressure on the government and reduce stakeholder motivation. Within the market-oriented development context, reforming the construction management model is crucial for breaking the current predicament. This research establishes a framework for the market-oriented construction management model for drainage projects and constructs a behavioral strategy evolutionary game model involving government, drainage management companies, and pollution discharge subjects. Through theoretical analyses and simulations, this research presents recommendations for the implementation of the market-oriented model. The research findings indicate that: (1) the market-oriented model is feasible both theoretically and practically. Pollution rights trading aids pollution discharge subjects in adapting to the market-oriented model. (2) Ensuring sewage charges remain within the interval [P1, P1 + L2 - L1] is crucial for trilateral cooperation. (3) Simulation analysis shows that intensifying policy support, reducing the cost of technological equipment upgrades, enhancing comprehensive income, lowering the pricing of sewage charges, and raising initial selection probability all promote a tendency towards ESS.

Assessment of the properties of concrete containing artificial green geopolymer aggregates by cold bonding pelletization process.

Recently, the usage of a cold-bonded method in the production of artificial green geopolymer coarse aggregates (GCA) has been crucial from an economic and environmental perspective because the sintering method consumes an enormous quantity of energy and generates a significant quantity of pollutants. This research investigated the manufacture of GCA via cold-bonded pelletization using two distinct industrial byproducts (GGBFS and FA) via a new and simpler pelletization technology. Three different binders were used to produce three distinct types of GCAs as partial replacements for natural coarse aggregate (NCA) at varying replacement rates (0%, 25%, 50%, and 75%). The first group used ground-granulated blast furnace slag, while the second used GGBFS with perlite, and the third used FA with perlite. An alkaline activator was commonly used with all three groups. The physical and mechanical properties of three distinct varieties of GCA were recorded. The results indicated that the mechanical and chemical properties of three different types of GCAs were nearly identical to those of natural aggregate, with the exception of their increased water absorption. According to the findings, the recommended mixtures were suitable for usage in the construction industry. The results indicated that the ratio of all investigated attributes declined as the number of GCAs increased. In contrast, lightweight concrete can be obtained at a ratio of GCA (FA with perlite) equal to 75%, where unit weight, compressive, splitting tensile, flexural, and water absorption strengths were 1.87 gm/cm3, 20.2 MPa, 1.8 MPa, 8 MPa, and 6.0%, respectively (FA with perlite).

Development of the Korean construction job exposure matrix (KoConJEM) based on experts' judgment using the 60 consolidated occupations for construction workers.

BACKGROUND: This study was conducted as an effort to develop a Korean construction job exposure matrix (KoConJEM) based on 60 occupations recently consolidated by the construction workers mutual aid association for use by the construction industry. METHODS: The probability, intensity, and prevalence of exposure to 26 hazardous agents for 60 consolidated occupations were evaluated as binary (Yes/No) or four categories (1 to 4) by 30 industrial hygiene experts. The score for risk was calculated by multiplying the exposure intensity by the prevalence of exposure. Fleiss' kappa for each hazardous agent and occupation was used to determine agreement among the 30 experts. The JEM was expressed on a heatmap and a web-based dashboard to facilitate comparison of factors affecting exposure according to each occupation and hazardous agent. RESULTS: Awkward posture, heat/cold, heavy lifting, and noise were hazardous agents regarded as exposure is probable by at least one or more experts in all occupations, while exposure to asphalt fumes was considered hazardous in the smallest number of occupations (n = 5). Based on the degree of agreement among experts, more than half of the harmful factors and most occupations showed fair to good results. The highest risk value was 16 for awkward posture for most occupations other than safety officer. CONCLUSIONS: The KoConJEM provides information on the probability, intensity, and prevalence of exposure to harmful factors, including most occupations employing construction workers; therefore, it may be useful in the conduct of epidemiological studies on assessment of health risk for construction workers.

Carbon emission prediction of construction industry in Sichuan Province based on the GA-BP model.

The reduction of the carbon emissions of construction industry is urgent. Therefore, it is essential to accurately predict the carbon emissions of the provincial construction industry, which can support differentiation emission reduction policies in China. This paper proposes a carbon emission prediction model that optimizes the backpropagation (BP) neural network by genetic algorithm (GA) to predict carbon emission of construction industry, or "GA-BP". To begin with, the carbon emissions of construction industry in Sichuan Province from 2000 to 2020 are calculated by the emission factor method. Further, the electricity correction factor is introduced to eliminate the regional difference in electricity carbon emission coefficient. Finally, four factors are selected by the grey correlation analysis method to predict the carbon emission of construction industry in Sichuan Province from 2021 to 2025. The results show that the carbon emissions of construction industry in Sichuan Province have been trending up in the past two decades, with an average increase rate of 10.51%. The GA-BP model is a high-precision prediction model to predict carbon emissions of construction industry. The mean absolute percentage error (MAPE) of the model is only 6.303%, and its coefficient of determination is 0.853. Moreover, the carbon emissions of construction industry in Sichuan Province will reach 8891.97 million tons of CO2 in 2025. The GA-BP model can effectively predict the future carbon emissions of construction industry in Sichuan Province, which provides a new idea for the green and sustainable development of construction industry in Sichuan Province.

Psychosocial Hazards in the Northern Territory Building and Construction Industry: A Profile of Job Demands and Job Resources in a Jurisdiction and Industry with High Rates of Suicide.

The work environment for building workers in Australia's Northern Territory (NT) is characterised by concerningly high rates of distress and suicide at both a jurisdictional and an industry level. Work-related psychosocial hazards are known antecedents of work-related distress and suicide, and more research is required to understand how these hazards impact workers in this unique building context. This paper examines the unique work environment in the NT building industry by comparing psychosocial hazards in the NT with those in the broader Australian building and construction industry. When comparing 330 NT self-report survey responses about psychosocial hazards in the workplace to 773 broader Australian building industry responses, supervisor task conflict for NT workers was more concerning, at 10.9% higher than the broader Australian cohort. Within the NT sample, comparisons between fly-in and fly-out/drive-in and drive-out (FIFO/DIDO) workers and non-FIFO/DIDO workers were also performed to determine specific local psychosocial hazards. When comparing FIFO/DIDO workers' responses to their NT peers, role overload and supervisor task conflict were significantly higher, and co-worker and supervisor support were lower. In FIFO/DIDO environments, praise and recognition, procedural justice, and change consultation were at concerningly lower averages than the broader NT building and construction industry. These results suggest that the NT building and construction industry, and particularly FIFO/DIDO operations, require greater resourcing, investment, and focus on workplace mental health initiatives to improve the work environment and wellbeing of this workforce and mitigate hazards that can lead to distress and the high rates of occupational suicide found in this jurisdiction and industry.

Utilization of sexual and reproductive health services among construction worker women in southern Ethiopia.

BACKGROUND: In Ethiopia, the utilization of sexual and reproductive health services (SRH) is alarmingly inadequate, leading to higher rates of maternal and newborn mortality. Disparities in accessing sexual and reproductive health (SRH) services exist among different population groups, with construction worker women at a higher risk of experiencing such issues. We investigated the utilization of sexual and reproductive health services and associated factors among construction worker women in Southern Ethiopia. METHOD: We conducted a cross-sectional study among construction worker women (15-49) in Southern Ethiopia from July 1st to July 30th, 2021. The participants were selected randomly using venue-day-time sampling (VDTS). The data were collected by a pretested structured questionnaire using an open data kit (ODK) and exported to Statistical Package for Social Sciences (SPSS) version 25 for analysis. Binary logistic regression analysis was conducted to identify factors associated with sexual and reproductive health service utilization. An adjusted odds ratio with 95% CI was used and statistical significance was declared at p-value < 0.05. RESULTS: The study revealed that 54.4% of women of reproductive age had used at least one sexual and reproductive health service in the past year. About 66.7% of women experienced sexual harassment at work, with sex discrimination (86.9%) and sexist hostility (57.9%) being the most common. Aged over 20 years, married women, living with husbands, friends, and boyfriends, within 30 min of health facilities, and having a favorable attitude were significantly associated with SRH service utilization. CONCLUSION: Nearly half of construction workers in southern Ethiopia are not using sexual and reproductive health services, indicating a concerning lack of access to such services. Over two-thirds of women experience sexual harassment in construction site. Therefore, to ensure universal access to SRH services, it is essential to design a new approach including outreach programs specifically tailored to reach such vulnerable groups.

Eco-friendly flame-retardant bamboo fiber/polypropylene composite based on the immobilization of halloysite nanotubes by tannic acid-Fe3+ complex.

Bamboo fibers (BF), as an important sustainable natural material, are becoming a hot alternative to synthetic fibers for the reinforcement of polypropylene (PP)-based composites. However, the weak interfacial compatibility between BF and PP as matrix and their inherent flammability limit the practical application of BF/PP composites (BPC). Here, a fire-safe BPC was fabricated by constructing flame-retardant interfacial layers containing tannic acid (TA)-Fe3+ complex and halloysite nanotubes (HNTs) on the fiber matrix followed by a hot-pressing process. The results showed that the interfacial chelating of TA with Fe3+ improved the dispersion of HNTs on the fibers and the interfacial interactions within the fiber matrix, resulting in the as-fabricated composite with significantly improved mechanical properties and water resistance. In addition, the flame-retardant composite exhibited higher thermal stability and enhanced residual char content. Moreover, the composite possessed significant flame-retardant performances with a reduction of 23.75 % in the total heat release and 32.44 % in the total smoke production, respectively, owing to the flame retarding in gaseous phase and condensed phase of TA-Fe3+@HNTs layers. This work offers a green and eco-friendly strategy to address the inherent problems of BPC material in terms of fire safety and interfacial compatibility, thus broadening their applications in the automotive interior and construction industries.

Crisis communication in construction: Organizational strategies for worksite fatalities.

INTRODUCTION: The construction industry is high risk and unpredictable, requiring extensive safety preparation, practices, and effectiveness on worksites. While preventative measures are important and well documented, the industry, in general, lacks effective crisis management strategies when safety measures fail. The focus of this study was to evaluate dominant crisis communication and management best practices and adopt those methods into models that could be used following a construction worksite fatality. METHODS: Through literature review, this study acknowledged barriers to crisis management implementation within the construction industry, defined worksite fatalities as a preventable crisis type, identified major organizational implications of a crisis event, determined applicable response strategies following a worksite fatality, and identified major stakeholder groups impacted by fatality events. Prominent communication theories and models that have been used in multiple industries were identified and researched for this study. The literature review revealed general crisis communication theories and models that could be adapted specifically to the construction industry. RESULTS: Two proactive communication models were created from the collected research. These models were designed to be adapted and utilized by construction organizations as a fundamental crisis communication tool and as a basis for individualized crisis management strategies following emergency events. CONCLUSIONS: This study concludes that worksite fatalities are considered a preventable crisis type, with the risk of legal, financial, and reputational damage to an organization. Appropriate response methods include ingratiation, mortification or corrective action strategies which are dependent on an organization's stakeholders, perceived responsibility, reputation, and crisis history. PRACTICAL APPLICATIONS: Construction organizations could apply the models proposed in this study as foundational building blocks in alignment with strategic crisis management planning and safety failure preparation.

Measuring safety performance of construction employees using data envelopment analysis: A case in Australia.

INTRODUCTION: Safety is one of the critical and persistent challenges in the construction industry. Measuring safety performance could allow decision-makers to check safety production processes and enhance the health and safety environment. METHOD: This study developed a total-factor framework based on the global Data Envelopment Analysis (DEA) method to measure safety performance. The performance trend and influencing factors of pure technical efficiency and scale efficiency were separately investigated. The safety performance of construction employees in Australia was measured as a case study. RESULTS: The results demonstrate that the safety performance in the Australian construction industry has been evidently enhanced, which is mainly promoted by the progress of pure technical elements. The scale factors did not play a positive and important role in driving the performance. CONCLUSIONS: The increasing regional differences in safety performance could be reduced by learning the practices from the benchmark construction industry, such as a young worker program, small business safety program, workplace mental health program, and advanced construction technologies. PRACTICAL APPLICATIONS: The method can be utilized to measure safety performance and investigate the pathways to enhance performance without influencing production inputs and outcomes. The model and experiences of how to promote safety performance on the policymakers and employers were recognized.

Insidious risks of wearable robots to worker safety and health: A scoping review.

INTRODUCTION: The construction industry is tormented by a high rate of work-related musculoskeletal disorders (WMSDs) and flat or declining productivity rates. To improve construction workers' safety, health, and productivity, construction researchers and practitioners are investigating the safe implementation of exoskeletons. However, concern exists that these human-robot interactions (HRI) could amplify the effects of existing health and safety risks and lead to new health and safety risks. Only a few comprehensive studies have identified safety and health hazards inherent in using exoskeletons within construction trades and potential strategies for mitigating these threats. This study attempts to bridge this gap. METHOD: A literature search was conducted using electronic databases. The authors relied on a 5-step scoping review process to examine academic publications, industry reports, and fact sheets to generate helpful information for this study. RESULTS: The review revealed 36 health and safety hazards associated with using wearable robots in high-risk construction trades. Twenty-two organizational and field-facing strategies were introduced as potential controls to mitigate the identified hazards. CONCLUSIONS: The study provided a knowledge-based foundation for HRI safety risk assessment and guidance to optimize pre-task planning. This foundation could lead to significant advances in construction trade safety and the successful execution of tasks by robotic technology. PRACTICAL APPLICATIONS: Results from the present study can guide construction practitioners and safety professionals involved in technology integration and safety risk assessment on safe ways to implement wearable robots. Moreover, the present study provides critical insight that could inform the design and implementation of job hazard analysis and shape continuous education programs and safety training. This study prompts policymakers, standard developers, and exoskeleton manufacturers to work closely to ensure a safe future for exoskeletons in the construction industry.

The role of organizational factors in promoting workers' health in the construction sector: A comprehensive analysis.

INTRODUCTION: The number of physical and mental problems caused by occupational accidents and diseases increases every year. To control them, the safety climate at work is a recognized critical factor. However, a widely applicable model to capture the safety climate for various industries and organizations is lacking. METHOD: This study proposes a theoretical model to measure the direct and indirect effects of safety climate on workers' physical and mental health, mediated by job satisfaction, in the construction sector. We propose a multidimensional construct of safety climate, considering the most salient factors from the literature, and including psychological capital as a new factor. Using data from the last wave of the European Working Conditions Survey (2015) in Spain, the proposed model was validated using structural equation modeling. RESULTS: Our findings suggest that to further improve the mental health of construction workers, work-life balance and job rewards and compensation must be prioritized along with safety climate. As for physical health, safety climate and work-life balance are crucial. Finally, we provide some recommendations for construction company managers based on a ranking of all the factors affecting the safety climate and the workers' health.

Research on helmet wearing detection method based on deep learning.

The vigorous development of the construction industry has also brought unprecedented safety risks. The wearing of safety helmets at the construction site can effectively reduce casualties. As a result, this paper suggests employing a deep learning-based approach for the real-time detection of safety helmet usage among construction workers. Based on the selected YOLOv5s network through experiments, this paper analyzes its training results. Considering its poor detection effect on small objects and occluded objects. Therefore, multiple attention mechanisms are used to improve the YOLOv5s network, the feature pyramid network is improved into a BiFPN bidirectional feature pyramid network, and the post-processing method NMS is improved into Soft-NMS. Based on the above-improved method, the loss function is improved to enhance the convergence speed of the model and improve the detection speed. We propose a network model called BiFEL-YOLOv5s, which combines the BiFPN network and Focal-EIoU Loss to improve YOLOv5s. The average precision of the model is increased by 0.9% the recall rate is increased by 2.8%, and the detection speed of the model does not decrease too much. It is better suited for real-time safety helmet object detection, addressing the requirements of helmet detection across various work scenarios.

A life cycle assessment of cardboard waste in low stress grade concrete applications.

Utilising cardboard waste for the partial substitution of cement within concrete has the potential to yield significant sustainability benefits. Cardboard waste is abundantly available, and a significant proportion of this material is disposed of in landfill. However, conversion of waste cardboard into kraft fibres (KFs) for concrete implementation can be utilised in the building and construction industry. Therefore, identification of sustainability variables associated with cardboard waste in concrete is vital. In this study, two KF composites satisfied the criteria for low stress grade concrete and were subsequently evaluated. SFKF5 mix design contained 5% KFs and SFKF105 contained 10% KFs with 5% metakaolin (MK). Both composites had silica fume (SF) as a fibre modification technique for durability purposes. A life cycle assessment (LCA) determined the environmental effect of waste cardboard integration. A Monte-Carlo simulation was utilised as the sensitivity analysis to investigate transportation and energy manufacturing greenhouse gas (GHG) emission variables. LCA results of SFKF105 had a savings of 11%, 8%, 4% and 1% for terrestrial acidification potential, global warming potential (GWP), terrestrial ecotoxicity potential (TEP) and human toxicity potential, respectively. SFKF5 revealed savings of 3%, 2% and 4% for GWP, TEP and marine eutrophication potential, respectively. The additional travel requirements of KFs and MK to the cement batching plant for composite production did not surpass the embodied energy and travel emissions of the control. However, this was negated due to the additional energy requirements to manufacture KFs. The control, SFKF5, and SFKF105 had an average total of 572, 1023 and 997 kgCO2-eq/m3, respectively.

CODD: A benchmark dataset for the automated sorting of construction and demolition waste.

This study presents the Construction and Demolition Waste Object Detection Dataset (CODD), a benchmark dataset specifically curated for the training of object detection models and the full-scale implementation of automated sorting of Construction and Demolition Waste (CDW). The CODD encompasses a comprehensive range of CDW scenarios, capturing a diverse array of debris and waste materials frequently encountered in real-world construction and demolition sites. A noteworthy feature of the presented study is the ongoing collaborative nature of the dataset, which invites contributions from the scientific community, ensuring its perpetual improvement and adaptability to emerging research and practical requirements. Building upon the benchmark dataset, an advanced object detection model based on the latest bounding box and instance segmentation YOLOV8 architecture is developed to establish a baseline performance for future comparisons. The CODD benchmark dataset, along with the baseline model, provides a reliable reference for comprehensive comparisons and objective assessments of future models, contributing to progressive advancements and collaborative research in the field.

Help-seeking intentions of UK construction workers: a cross-sectional study.

BACKGROUND: In response to the high rates of poor mental health in the construction industry, numerous workplace interventions have been designed to address the known and suspected risk factors to employee mental health and well-being. A key challenge of these strategies is low engagement in support services. AIMS: The goals of this research were to investigate the help-seeking intentions of employees in the construction industry, explore levels of mental well-being in this population and provide insight into employee engagement with mental health support strategies. METHODS: Employees from two UK construction companies completed an online cross-sectional questionnaire (n = 119), designed to measure help-seeking intentions, levels of mental well-being and worker attitudes towards workplace mental health support strategies. RESULTS: One-third of the sample reported experiencing an episode of mental health difficulties in the past 6 months. Employees reported a greater preference for seeking support from informal versus formal help sources. Participants were most likely to seek help from a partner and least likely to seek help from a Mental Health First Aider/ Champion. The study also showed some association between help-seeking intention and age of employees. CONCLUSIONS: Given the poor levels of mental well-being in this population, it is essential that adequate workplace support is provided. Whilst formal help sources are important for this population, our study highlights the potential benefits of informal help sources to support employees. Future interventions may therefore wish to consider developing tailored, informal workplace support networks and programmes.

Occupational risk perception of construction workers: a cross sectional study.

Introduction: Construction workers are often exposed to significant injury risk. The aim of our study is to assess their occupational hazards and injury risk perception. Methods: We administered 256 questionnaires to construction workers. The survey was aimed at collecting information regarding occupational risk and hazard exposure perception, risk control and behavioral self-assessment. We analyzed the data obtained in order to highlight any associations between injury risk perception and anamnestic, occupational, behavioral or perceptual factors. Results: Participants were prevalently males (92.37%) aged 21-60 years (94%). They showed a job seniority level of 21.3 (11.51) on average and, ranging from a 1 to 10 score, a danger awareness of 6.8 (2.9), a lack of prevention measures 6.0 (3.3), an improper behavior of 7.3 (2.7), an unpredictable fate of 6.0 (2.9). These factors resulted significantly associated with the injury risk perception. Multivariable analysis highlighted that the injury risk perception was associated with the lack of prevention measure and unpredictable fate. On the other hand, we found a negative association with the workers' improper behaviors. Conclusion: Workers' perception showed fairly uniform average values even when occupational risk was demonstrated. Our analysis suggests a positive correlation between injury risk perception and the idea that injuries are due both to fate and to chance; it also shows a negative correlation between injury risk perception and the idea that injuries are due to improper behavior. A lack of fully comparable studies confirms the need for further studies on the injury risk perception of construction workers.

Individual evaluation of fatigue at work to enhance the safety performance in the construction industry: A systematic review.

The construction industry is recognized as one of the most hazardous industries globally due to the dynamic on site activities and labour-intensive characteristics. The construction tasks are physically and cognitively demanding therefore the construction workers are prone to work fatigue which compromises safety performance. The evaluation of fit for duty, or fitness for work (FFW) aims to determine if workers are at risk of adverse impacts of ill-health, injury or accidents. This systematic review aimed to critically summarize up-to-date measures and evaluation tools that were employed to monitor work fitness or fatigue specifically among construction workers. Adhering with the PRISMA protocol, three databases were searched from the inception to 2022, with a total combination of 37 keywords, concluding to the selection of 20 relevant articles. The Mixed Method Appraisal Tool (MMAT) was used as the guide for the study appraisal. A total of 20 articles were reviewed, published from 2008-2022. Majority of the studies employed experimental design. The review identified the subjective evaluation scales and objective measurement tool. The subjective self-response questionnaires can be categorized into single dimension or multidimension covering both physical and mental fitness; whereas the objective measurement tool can be categorized into physiological metrics, physical and cognitive performance measure. The available scientific evidence has raised the relevant issues for on-site practicality and potentially guide the formulation of evidence-based guidelines for the FFW assessment in the construction industry.

A temporal evaluation of respirable crystalline silica exposure for construction tasks.

Personal air monitoring using a TSI SidePak AM520 personal aerosol monitor was performed on a northern Colorado construction site during five tasks from the OSHA Table 1: Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica to estimate silica dust concentrations in real time. Photometric measurements were modified using a gravimetric correction factor and a % respirable crystalline silica adjustment. Each task was sampled once; sample time ranged from 14 min to 40 min, with a mean sample time of 27 min. The mean silica dust concentration estimates (µg/m3) (standard deviation [SD]) for the five tasks computed from the TSI SidePak AM520 respirable dust measurements were core drilling 12 µg/m3 [2.46], grinding 918 µg/m3 [1134.08], cutting with a walk-behind saw 36 µg/m3 [79.67], jackhammering 27 µg/m3 [23.24], and dowel drilling 66 µg/m3 [77.65]. Silica exposure estimates from real-time monitoring can be used to identify exposures that may be related to inadequate controls or worker behaviors that contribute to peak exposures. Respirable crystalline silica exposure estimates presented here are likely not generalizable to other construction sites or tasks.